Diluent for Sysmex 3-Part Hematology Analyzers provides precise cell suspension, osmotic stabilization, and controlled electrical conductivity required for routine complete blood count (CBC) testing on 3-part differential systems.
What Is Hematology Analyzer Diluent?
An isotonic electrolyte solution formulated to dilute whole blood specimens, maintain cellular morphology without hemolysis, and serve as a conductive sheath fluid during impedance measurement.
Application in Hematology Analysis
Red Blood Cell & Platelet Sizing: Maintains target osmotic pressure to prevent cell swelling or shrinkage during volumetric impedance counting.
White Blood Cell Dilution: Serves as the primary carrier fluid to deliver blood cells through the aperture sensing zone without introducing background microparticles.
Fluidic Maintenance: Cleans fluidic lines, apertures, and flow cells between sampling cycles to eliminate carryover contamination.
Compatible Analyzer Series
- 3-Part Differential Hematology Analyzers
- Automated Closed-Tube Sampling Systems
- Compact Clinical Laboratory Analyzers
Product Specifications
|
Parameter |
Specification Standard |
|
Physical State |
Clear, colorless, particle-free liquid |
|
pH Range (25°C) |
6.80 - 7.20 |
|
Osmolality |
320 - 360 mOsm/kg |
|
Conductivity (25°C) |
17.0 - 20.0 mS/cm |
|
Background Count - WBC |
≤ 0.2 × 10⁹/L |
|
Background Count - RBC |
≤ 0.02 × 10¹²/L |
|
Background Count - PLT |
≤ 10 × 10⁹/L |
|
Background Count - Hb |
≤ 10 × 10⁹/L |
|
Lot-to-Lot Precision (CV) |
< 1.5 % |
|
Storage Temperature |
2°C - 35°C |
|
Unopened Shelf Life |
24 Months |
|
Open-Bottle Stability |
60 Days |
Key Features
Osmotic Balance: Preserves erythrocyte volume and membrane integrity during analysis.
Controlled Conductance: Matches original impedance baselines to prevent calibration drift.
Sub-Micron Filtration: Processed through 0.1 μm filters to eliminate particulate interference.
Cyanide-Free Formulation: Meets international environmental and occupational safety protocols.
Aperture Protection: Contains surfactant agents that reduce protein buildup in fluidic lines.
Package & Storage
20L Container: High-density polyethylene internal bag with outer corrugated box and integrated dispense valve.
10L Container: High-density polyethylene container with tamper-evident seal.
Bulk Shipment: Palletized loads, 48 boxes per pallet, shrink-wrapped with corner protectors.
Storage Requirement: Store at 2 °C - 35 °C in a dry place away from direct sunlight; avoid freezing.
Manufacturing & Supply
ISO 13485 Manufacturing: Produced in automated cleanroom environments under controlled quality management systems.
Purified Water System: Formulated using multi-stage reverse osmosis and ultra-filtered water (18.2 MΩ·cm).
Batch Consistency: Every lot undergoes spectrophotometric, conductive, and automated cell counter verification prior to release.
Production Capacity: Automated liquid filling lines ensure continuous large-scale output and predictable lead times.
Related Hematology Reagents
- Lyse Reagent for 3-Part Hematology Analyzers
- Enzymatic Cleaner for Hematology Systems
- Aperture Cleaning Solution
Frequently Asked Questions
Q: Does this diluent require re-calibration of the analyzer upon installation?
A: No. Osmolality, pH, and conductivity values match required system parameters, allowing direct replacement without adjusting parameter settings.
Q: How is background particle contamination prevented during manufacturing?
A: The solution passes through multi-stage 0.1 um absolute membrane filtration steps prior to automated filling in cleanroom conditions.
Q: What is the stability after opening the container?
A: Open-bottle stability is 60 days under standard operating conditions (15°C - 30°C) when using the sealed dispense tap.
Q: Are safety data sheets and Certificates of Analysis provided with shipment?
A: Every production batch includes a batch-specific Certificate of Analysis, and Safety Data Sheet documentation accompanies international shipments.
Q: Is this reagent compatible with automated fluidic sensors?
A: Yes, the formulation incorporates conductivity parameters designed to trigger fluidic sensors and float switches without error codes.
Hot Tags: diluent for sysmex 3-part hematology analyzers, China diluent for sysmex 3-part hematology analyzers manufacturers, suppliers, Hematology Calibrator Set












